“ Bugünden Geleceğe... “
  • Tilo L8212 :

    Polyether modified poly-dimethyl-siloxane. It improves substrate wetting due to strong reduction of surface tension; they also improve flow and leveling. They cause no or only slight foam stabilization.It is used in all solvent-based, solvent-free and aqueous coatings. In two component polyurethane systems, it can also be added to the isocyanate hardener.

  • Tilo L8210 :

    Polyether modified poly-dimethyl-siloxane. Levelling agent for solvent based, solvent-free and also water-based systems. Strongly increases surface slip and considerably improves substrate wetting. It can be used universally in all printing ink systems. In aqueous systems, it increases anti-blocking properties. Tilo-L8210 displays excellent compatibility and can be used as an anti-cratering additive.

  • Tilo L8216 :

    Silicone surface additive for solvent-borne coating systems and inks. It improves dust and spray dust acceptance and allows higher film thickness on vertical surfaces. Tilo-L8216 reduces air draft sensitivity in wood and furniture coatings. It also improves flatting agent orientation. It can strongly reduce surface tension with excellent substrate wetting ability, anti-cratering and increase surface smoothness.

  • Tilo L8538 :

    Fluorocarbon-modified polymer Levelling agent for solvent based and solvent-free coatings. It is especially suitable for stoving enamels based on alkyd, acrylic and polyester resins, polyurethane coatings, 2-pack epoxy compounds, air-dried alkyd systems. Improves levelling , prevents cratering, helps substrate wetting, does not interfere with intercoat adhesion.

  • Tilo L8511 :

    Acrylic leveling additives for solvent-based and solvent-free systems.It is suited for high quality pigmented and non-pigmented industrial coatings. Typically it does not cause turbidity in clears and hazing in pigmented systems. It can improve leveling and gloss. Can produce a long wave effect and avoid cratering in the system. The acrylate additive doesn’t negatively influence recoatability or intercoat adhesion. Surface tension is only slightly reduced. It is thermally stable.

Telefon

+90 232 361 53 30 / 0850 850 5330

+90 530 607 75 17

Fax

+90 232 361 33 83

Adres

Zübeyde Hanım Mah. 7447/14 Sokak No:1/E D:2 18 Karşıyaka / İzmir / TÜRKİYE

Bizi Takip Edin